MADRIX Forum

Hi Dingken,

Thank you for your feedback.

The list will be refreshed if a change was done on the interface (for example a new interface is connected or it was restarted). This cannot be disabled, I'm sorry!

Hi Max X, Welcome to the MADRIX Forum! Yes, this is possible and you don't need a macro to do it. You will find the function in the DMX-IN Remote Editor under Deck A / Deck B > Storage Place > Layer > Opacity > Layer Here you can learn how to create a custom DMX-IN configuration / map: https://help....

Hi Waiii,

Please add a space between the [line feed] and the Host and try again: Does it work correctly now?

Hi cuthbec,

Yes, you are right. I made a little mistake in my example, the third list entry should be assigned to DMX channel 3. Sorry!

Hi cuthbec, Yes, you will need to create a corresponding remote configuration in MADRIX 5. The required function called "Deck A Place ID", "Deck B Place ID" or "Deck A Place ID + Fade" and "Deck B Place ID + Fade" The configuration would consist of 48 entries ...

Hi videoanger, There was an issue in an older MADRIX LUNA firmware, which leads to the MADRIX LUNA not appearing in the "MADRIX Device Configuration" menu. However this issue has been resolved some time ago. In order to update firmwares for MADRIX hardware devices, please use the MADRIX HA...

Hi Rasemi,

Please contact the Avolites support on regard to the network configuration.

Hi Alex_V,

To get it working you will need to use a "Storage Place Parameter Chaser" instead of the "Effect Parameter Chaser". You will find it right above the Storage Places (see image below). You can use the same steps as you did before.

Hi PLebegue, To further analyze the issue please send us the used MADRIX 5 setup and a logfile to info[at]madrix[dot]com. To save the logfile please start MADRIX and select "Tools" > "Logfile...", click the button "Save As..." and enter a name for the logfile. Thanks in...

Hi Alex_V, It is possible to set a "Start Frame" in the effect options in the effect. If you now use the Opacity Action "Restart" it is possible to "start" the effect with a given frame, once the opacity is set to 0 and than back to 255. As I'm not sure if this is what ...