MADRIX Forum

Hi aseman011, Welcome to the MADRIX Forum. Natively this is not possible. That means you will need to create a macro to achieve this. If you need assistance please send us an e-mail to info[at]madrix[com] Here you will find the documentation: https://help.madrix.com/m5/html/script/index.html?hidd_fr...

Hi Eric, You will need to create a corresponding fixture profile with the Fixture Editor. The dimmer channel needs to be set "Fixed" with a "Default Value" of 255 and the FX should be also "Fixed" with a value of 0. You can build the fixture file yourself or you can sen...

Hi PLebegue, Could it be that the connected fixtures do not allow to receive a non-complete DMX universe, that means less than 512 channels? What happens if you activate "Full Frames" in the MADRIX 5 Device Manager? Therefore please navigate to "Preferences" > "Device Manage...

Hi mbarnstijn, Welcome to the MADRIX forum. Thank you for your request! For now you can use HTTP remote in order to control MADRIX 5 remotely with a building management system. Here you will find the HTTP documentation with all available commands: https://help.madrix.com/m5/httpremote/HttpRemoteCont...

Hallo Holger, Schau dir dazu am besten die folgenden Tutorials an: https://youtu.be/t9Yl_lk9KZQ?si=jZoHXDbEyTWn9SBM https://help.madrix.com/tutorials/m5/HTML/hidd_remote_control_via_midi.html https://help.madrix.com/tutorials/m5/HTML/hidd_changing_a_predefiend_midi_map.html https://help.madrix.com/m...

Hallo Holger, Nein das geht leider nicht, MADRIX 5 verwendet immer den UDP Port 6454 [0x1936]. Dies ist auch vom Art-Net Standard so vorgesehen. Im Standard gibt es dazu ein extra Kapitel "Port", in welchem folgender Satz steht: Port: Actual data transmission on Art-Net uses the UDP protoc...

Hallo Holger, es scheint ganz so als würde die "PC Dimmer" Software den Port 6454 (Art-Net port) exklusiv verwendet. Das heißt dann leider auch, dass du keine zweite Software (z.B. MADRIX 5) verwenden kannst um über Port 6454 Daten zu senden. MADRIX 5 hingegen verwendet den Port nicht exkl...

Hallo Holger,

kurze Anmerkung:
Es gibt noch einen weiteren Weg. Du kannst die Kanalreihenfolge / Farbreihenfolge auch direkt über die MADRIX NEBULA Webkonfiguration verändern. Die entsprechende Einstellung nennt sich "Channel Order".

Hi Dadocivic,

Thank you for the update.

Yes, for some LEDs / ICs it is necessary to adjust the number of "channels per universe".

Hi webcentrik,

Thank you for your report.

Which MADRIX HARDWARE MANAGER version do you use ('Help' > 'About...')?
To further analyze the issue please send us all logfiles from the AURA sd card and white scene, which seems to cause the issue.

Thanks in advance!